Device Details
Overview
| Name | Version: | Looper Pedal 2.0 |
| Author: | B4F |
| Device Type: | MIDI Effect |
| Description: | An alternative to the looper pedal that can be mapped and activated only when the track is armed or selected. I had made a version previously but there were problems: I rewrote everything Control the last looper of the track. Unfortunately does not work to record a loop without defined size (record x bars) under penalty of having synchronization problems. I did it to control all my loopers with the same physical pedal. |
Details
| Live Version Used: | 11.3.3 |
| Max Version Used: | 8.5.4 |
| Date Added: | Jun 23 2023 21:08:23 |
| Date Last Updated: | No Updates |
| Downloads: | 425 |
| ⓘ License: | None |
Average Rating
(1) Log in to rate this device |
5 |
Files
| Device File: | Pedal Looper V2.amxd |
Comments
This is useful for me. Thank you for the device.
Posted on June 24 2023 by Syn |
Report Issue
Hi,
Can you please explain how this thing works?
Can you please explain how this thing works?
Posted on June 27 2023 by soundmagician |
Report Issue
Hey sounmagician
How to Use:
Just put the device in the effects chain: It will control the last looper in the effects chain (if you put several). The principle is to map the device button with an external controller. The controller will only be active if the track is armed or selected. It's less good than mapping the "pedal" button of the looper but it allows you to have a single controller for different loopers which is not possible by mapping the "pedal" button (unless you want all the loopers to do exactly the same actions at the same time)
The only goal is to control several loopers on several tracks with the same controller and to be able to choose which looper will be assigned to each signal from the controller (a switch pedal in my case).
How to Use:
Just put the device in the effects chain: It will control the last looper in the effects chain (if you put several). The principle is to map the device button with an external controller. The controller will only be active if the track is armed or selected. It's less good than mapping the "pedal" button of the looper but it allows you to have a single controller for different loopers which is not possible by mapping the "pedal" button (unless you want all the loopers to do exactly the same actions at the same time)
The only goal is to control several loopers on several tracks with the same controller and to be able to choose which looper will be assigned to each signal from the controller (a switch pedal in my case).
Posted on February 07 2024 by B4F |
Report Issue
Login to comment on this device.
Browse the full library