Device Details
Overview
| Name | Version: | GamePad modulate 1.0 |
| Author: | keikusama |
| Device Type: | Audio Effect |
| Description: | GamePad_modulate is a mapping controller device for common game controllers (corresponding to the gamepad object in Max 8.6). You can control any parameter from your game controller by using new object [live.modulate~] (supported since Live12). also can change the behavior of the I/O switches with the Latch/Unlatch buttons. Whatever it is, it's free. And as you know, you can look inside the M4L device and change it as you like. You can modify it as you like. Special thanks. Mr. Junichi Oguro for giving me the opportunity to create this device. |
Details
| Live Version Used: | 12.0 |
| Max Version Used: | 8.6.0 |
| Date Added: | Mar 04 2024 13:11:38 |
| Date Last Updated: | No Updates |
| Downloads: | 676 |
| ⓘ License: | None |
Average Rating
(1) Log in to rate this device |
5 |
Files
| Device File: | GamePad_modulate.amxd |
Comments
Works fine except the gyro, but maybe I'm missing something. The layout is clean. Bravo !
Posted on March 22 2024 by tguyfr |
Report Issue
Hi tguyfr.
Please turn on the toggle switch. This is located on the left side of the gyro parameter at the bottom of the device.
Why did I turn on this switch? The gyro is constantly sending out values, so I thought it would interfere when rec automation other parameters.
Please turn on the toggle switch. This is located on the left side of the gyro parameter at the bottom of the device.
Why did I turn on this switch? The gyro is constantly sending out values, so I thought it would interfere when rec automation other parameters.
Posted on April 03 2024 by keikusama |
Report Issue
Hi keikusama,
Thank you for sharing your work.
I found some controls to feel a little unresponsive, such as the triggers. Removing 'qlim 160' helped.
Did you find serious problems without this data rate limiting?
Thank you for sharing your work.
I found some controls to feel a little unresponsive, such as the triggers. Removing 'qlim 160' helped.
Did you find serious problems without this data rate limiting?
Posted on April 07 2024 by Throw |
Report Issue
Hi Throw
No, that was something I installed to limit the large amount of data coming in from the gyro sensor.
This limits continuous data of less than 160ms. You may want to change it to a value you desire.
No, that was something I installed to limit the large amount of data coming in from the gyro sensor.
This limits continuous data of less than 160ms. You may want to change it to a value you desire.
Posted on April 20 2024 by keikusama |
Report Issue
Good, thank you !
On PC, I can map fader or knob, but not clip or gate button. Is it normal ?
On PC, I can map fader or knob, but not clip or gate button. Is it normal ?
Posted on October 23 2024 by tigrou666 |
Report Issue
Login to comment on this device.
Browse the full library