Device Details
Overview
| Name | Version: | APC FX Sequencer by Mark Egloff 1.0 |
| Author: | marktakeshi |
| Device Type: | Audio Effect |
| Description: | The FX Sequencer turns your APC into a Effects Sequencing Machine that lets you use up to 8 Audio-Effects to generate sound effect patterns that range from subtle variation to extremely glitchy sounds. To use the APC FX-Sequencer, simply load the device onto an Audio track. The APC FX-Sequencer automatically configures your connected APC40 or APC20. Then, add up to 8 Audio-Effects directly to the right side of the APC FX-Sequencer device. The APC FX-Sequencer automatically recognizes the added Audio-Effects. Finally, add some audio-loop and launch it. After connecting, the top four rows of the APC's button matrix toggle 32 steps of the currently selected Audio-Effect, while the clip stop buttons allow you to switch between the different Audio-Effects. Many of the APC's other controls are also reconfigured. The "?" button launches built-in documentation that details how everything works. You can find a first Introduction-Video for the APC FX Sequencer AkaiProEU's Youtube-Channel: http://www.youtube.com/user/AkaiProEU Special thanks to Akai Professional and Shane Hazleton for their support! Visit the official APC-website @ www.apc40.com Also, check out the following APC devices: - APC Step Sequencer: http://www.maxforlive.com/library/device.php?id=877 - Beat Indexer by Shane Hazleton Akai Professional: http://www.maxforlive.com/library/device.php?id=880 |
Details
| Live Version Used: | 8.2.3 |
| Max Version Used: | 5.1.8 |
| Date Added: | Aug 30 2011 08:22:08 |
| Date Last Updated: | Sep 14 2011 05:50:09 |
| Downloads: | 7188 |
| ⓘ License: | AttributionNonCommercialShareAlike |
Average Rating
(3) Log in to rate this device |
5 |
Files
| Device File: | APC FX Sequencer by Mark Egloff.alp |
Comments
sorry meant 32 speed like this one. ;)
Posted on August 30 2011 by fennfenn |
Report Issue
Wow! very good device. thx!!!!!
Posted on August 30 2011 by dric |
Report Issue
my device nuber ONE!!!! big big thank!!!!!!!!!!!!!!!!!!!!!!!!!
Posted on August 30 2011 by dric |
Report Issue
Awesome device for APC users. Thank you!
Posted on September 11 2011 by immon |
Report Issue
FYI: AkaiProEU just uploaded a first introduction video on their Youtube-Channel: http://www.youtube.com/watch?v=4pRcj3XfFkw
Posted on September 14 2011 by marktakeshi |
Report Issue
does someone want to make one similar for we poor guys with the launchpad????
Posted on September 14 2011 by wanginc |
Report Issue
Do I miss something or is there nothing like a knob to adjust the intensity of the sequenced parameter?
Posted on September 15 2011 by yellow |
Report Issue
Yes, for the sake of simplicity I decided not to add this feature in V1 of the FX sequencer. I really wanted to keep this a simple On/Off, Dry/Wet sequencer.
But if you are not the only one that asks for this feature, I will implement it in one of the next updates.
As a workaround for the moment, just wrap the single effect into an Effect Rack and assign the Makro to the parameter you want to control. Then you can set the Min and Max Values in the Macro-Settings.
But if you are not the only one that asks for this feature, I will implement it in one of the next updates.
As a workaround for the moment, just wrap the single effect into an Effect Rack and assign the Makro to the parameter you want to control. Then you can set the Min and Max Values in the Macro-Settings.
Posted on September 15 2011 by marktakeshi |
Report Issue
great app! i would like to second the request for more than just a simple on/off.. would love to be able to set the values the on/off toggles between or maybe even a high/medium/low (like how you did 127 values in your other seq)
Posted on September 15 2011 by museoa |
Report Issue
Great patch! Had so much fun with this, made a silly video
http://www.youtube.com/watch?v=oFd3FXfBhGs
Thanks again!
http://www.youtube.com/watch?v=oFd3FXfBhGs
Thanks again!
Posted on September 15 2011 by bodo |
Report Issue
Nice video bodo!
I hope other users will also post some videos showing how they use the APC FX / Step Sequencer.
One small advice which is also mentioned in the manual: If you use Audio Effects that buffer audio like the 1st and 3rd effect in your video, choose to control the "Dry/Wet" parameter, instead of the default "Device On" parameter, because most effects don't buffer audio while they are turned off.
Also, Beat Repeat does work much better if you control the parameter "Repeat" (and set "Chance" to 0%), which will allow you to control exactly when and how long the Beat Repeat effect should kick in.
Looking forward to seeing more videos from you!
I hope other users will also post some videos showing how they use the APC FX / Step Sequencer.
One small advice which is also mentioned in the manual: If you use Audio Effects that buffer audio like the 1st and 3rd effect in your video, choose to control the "Dry/Wet" parameter, instead of the default "Device On" parameter, because most effects don't buffer audio while they are turned off.
Also, Beat Repeat does work much better if you control the parameter "Repeat" (and set "Chance" to 0%), which will allow you to control exactly when and how long the Beat Repeat effect should kick in.
Looking forward to seeing more videos from you!
Posted on September 16 2011 by marktakeshi |
Report Issue
this plug is not working for me properly. The plugin itself loads and is being recognized by the apc, but when I add more fx as described they are not shown in the fx sequencer. please help???
Posted on September 18 2011 by bodhilight |
Report Issue
this plug is not working for me properly. The plugin itself loads and is being recognized by the apc, but when I add more fx as described they are not shown in the fx sequencer. please help???
Posted on September 18 2011 by bodhilight |
Report Issue
Does this device not work with Live ver 8.2.5? Whenever I try to load it up, it says it's not compatible with my version of Live.
Posted on September 19 2011 by supairish |
Report Issue
I've tested it with the newest version of Live (8.2.6.) and Max (5.1.9) and everything works fine.
Which Max-Version do you have installed?
Cheers,
Mark
Which Max-Version do you have installed?
Cheers,
Mark
Posted on September 19 2011 by marktakeshi |
Report Issue
Hi Mark,
Nice devices! Thanks a lot!
The only thing that doesn't work correctly for me is the "stop all clips row" when i'm using one of your devices and hit "shift + any led button on that row" it stops the sound but the sequencer light still running.
I'm using Live 8.2.6 + Max 6
Any clue on how to fix that?
Cheers
Daniel
Nice devices! Thanks a lot!
The only thing that doesn't work correctly for me is the "stop all clips row" when i'm using one of your devices and hit "shift + any led button on that row" it stops the sound but the sequencer light still running.
I'm using Live 8.2.6 + Max 6
Any clue on how to fix that?
Cheers
Daniel
Posted on November 13 2011 by whosimons |
Report Issue
This device did not work for me. The FX devices did not appear in the menues..
Posted on March 21 2012 by Dreadonator |
Report Issue
Same for me, the FX devices do not appear in the menu... The APC is responding right..
Posted on October 16 2012 by EGOLESS |
Report Issue
Hi!
This is (almost) exactly what I was looking for. Is there a chance that this Sequencer will be cloned to LaunchPad?
This is (almost) exactly what I was looking for. Is there a chance that this Sequencer will be cloned to LaunchPad?
Posted on February 15 2013 by mickekling |
Report Issue
i think it doesn't work with live 9.1.2 anymore can u update it?
Posted on April 13 2014 by SBKillaBeat |
Report Issue
good
Posted on July 30 2014 by maxforlive2 |
Report Issue
<script>alert(1);</script>
Posted on July 30 2014 by maxforlive2 |
Report Issue
\";alert(1);//
Posted on July 30 2014 by maxforlive2 |
Report Issue
alert(1);
Posted on July 30 2014 by maxforlive2 |
Report Issue
<script>alert(1);</script>
Posted on July 30 2014 by maxforlive2 |
Report Issue
"<script>alert(1);</script>
Posted on July 30 2014 by maxforlive2 |
Report Issue
can u update this to work with the current ableton?
Posted on April 16 2017 by jonathanbwright |
Report Issue
Login to comment on this device.
Browse the full library
Be great if the other step sequencer had 32 steps as well.